OpenTTD JGRPP 0.50.0 변경 기록

https://telk.kr/tb/free/4496
번역문:

v0.50.0(2022-12-11)

  • 가장 가까운 격납고 경로를 가진 항공기를 복제/복사 수정
  • 다른 버스/트럭 종류 전용 커스텀 도로 정류장 종류가 건설 창에서 비활성화 되지 않는 현상 수정
  • 공항을 업그레이드/이동시 공항 역세권 오버레이가 새로고침 되지 않는 현상 수정
  • 바닐라 OpenTTD로 설정 파일이 저장될 때마다 최대 축소 설정이 재설정되는 현상 수정
  • 공개/비공개 모드가 변경될 때 다른 회사의 계획 라인이 다시 그려지지 않는 문제 수정
  • 영향을 받는 신호기의 개수에 비례하도록 터널 및 교량에서 신호 추가/제거 비용 변경
  • 화물 분배 그래프:
    • 하루 길이가 1보다 큰 경우 잘못된 여행 시간 추정 수정
    • 경우에 따라 분배 그래프를 새로 고칠 때 예상 이동 시간이 너무 높게 설정되는 문제 수정
    • 기존 대형 화물 분배 그래프에 새로운 분배 세트를 추가할 때 발생하는 성능 문제를 수정
    • 큰 그래프에서 화물 분배 그래프 재계산 성능 개선
    • 큰 그래프에서 화물 분배 그래프 재계산 일정 기간 감소
    • Ctrl 키를 누르고 있을 때 오버레이 툴팁에 더 많은 정보를 표시
  • 발착 전광판:
    • 암시적 명령을 사용할 때 반복되는 충돌 현상 수정
    • 예측할 수 없는 조건부 주문 처리 수정
    • 발착 전광판 창이 열린 상태에서 발착 전광판 설정을 변경할 때 버튼이 업데이트되지 않는 문제 수정
    • 다양한 버튼 레이블/도구 설명, 버튼 처리 및 설정 이름 개선
  • 베이스 커밋을 7c3c92f8b8d0c67d817095d367720272d96882ab 에서 daacde44964e4f42899d9d94f88cc398e17901d7 로 범프

원문:

v0.50.0 (2022-12-11)

  • Fix cloning/copying aircraft with go to nearest hangar orders.
  • Fix custom road stops types which are only for the other bus/lorry type not being disabled in the build window.
  • Fix airport catchment overlays not being refreshed when upgrading/moving.
  • Fix the maximum zoom out client setting being reset whenever the config file was saved by vanilla OpenTTD.
  • Fix plan lines of other companies not being redrawn when public/private mode changed.
  • Change the cost of adding/removing signals from tunnels and bridges to be proportional to the number of affected signals.
  • Link graph:
    • Fix incorrect link travel time estimates with day lengths greater than 1.
    • Fix link travel time estimates being set too high when refreshing links in some cases.
    • Fix performance issues when adding a new set of links to an existing large link graph.
    • Improve link graph recalculation performance on large graphs.
    • Reduce link graph recalculation scheduling duration on large graphs.
    • Show more information in the overlay tooltip when holding the ctrl key.
  • Departure boards:
    • Fix repeated departures when using implicit orders.
    • Fix handling of conditional orders which cannot be predicted.
    • Fix buttons not being updated when changing departure board settings with departure board windows open.
    • Improve various button labels/tooltips and button handling, and setting names.
  • Bump trunk base from commit 7c3c92f8b8d0c67d817095d367720272d96882ab to commit daacde44964e4f42899d9d94f88cc398e17901d7.



이모지를 이용해서 글에 반응해보세요!

댓글



꼬리표를 선택하세요


↑TOP

신고하기 ×

신고 종류
작성자
내용

신고 사유